How to run security camera wires through walls

Run security camera wires of surveillance wired system is the most complicated part of the installation process, there are many ways you can use for running camera wires soffit, ground, and walls.

But what is the right way to do this process?

Security cameras you install at home would be positioned out of your home. However, you will have the DVR mounted at a place inside the home.

This is where you will come across the need to understand how to run security camera wires through walls.

If you can follow an appropriate guide and if you can use the correct tools, you will be able to do this on your own. That’s why we thought of sharing this guide for you to follow.

Tools used For Run Security Camera Wire through Walls

Before taking a look at the steps, you need to understand what tools are needed. The tools that you would need to have are

1.     Screwdriver.

2.     Power plug.

3.     Camera cables.

4.     PVC conduit.

5.     Electric plastic box.

6.     Fish rod and bits.

These are the most common tools used by professional installers to run camera cables, you can choose any tool you want to do the work in the right way.

Steps to run the security camera wires through walls

Step1: Plan the route of wires

To run security camera wires through walls for the home system, you will have multiple cameras and wires connect to them. If you don’t plan the route of cables, you will end up with a disaster.

Hence, it is worthy to take your time and plan the route of wires. You should understand where you should be placing the security cameras.

Then you will need to understand the place where you are going to keep the DVR. You should also have an electric plastic box, which can act as the junction for all the camera wires.

It should be placed in a position where there is enough safety and no one can reach it easily, as a Digital Video recorder is the heart of the surveillance system.

Note: Make sure you choose the short route of wire to make the burial job easy on you, Look at the diagram of your house and check the best place for drilling and installing the system.

Step2: Install the cameras

After the extensive planning process, you can proceed to install the cameras. You can mount the cameras through attic or through walls whatever you like..

First: For Brick Wall, you will need to use an electric drill so that you will be able to create a gutter for having PVC, or metal conduits.

You will need to drill the brick wall and then position the polyvinyl chloride conduits accordingly. These conduits will be used to pass the wires from your security cameras into the home.

In fact, these conduits are in a position to provide enhanced protection to all the security camera wires, so that no person will be able to cut them.

You can even use these conduits to enhance their protection from the weather in the long run. Plus, prevent the water to reach to cable inside the conduits.

Note: You should carefully position the PVC conduits. Then you can keep them in place, and you will never run into any problems with them in the future.

Second: For Wood Wall, run security camera wires though walls especially wood walls is easier than run wires in brick walls.

You’ll need to use a fish tape to help you in your job of security cameras cabling, fish tape use to pull wires from the central hub to the cam location.

Note: Remember to get someone for helping you, one feed the wires through walls and the other person pull it.

For Analog CCTV or Digital cameras there’s a mounting box has 1 port or more For Ethernet or Coaxial cables depending on your needs, The mounting plate has a screws to fix it and eliminate the increase of wires.

Once you finish pulling the wires and attach it to BNC or RJ45 of cables then you can power the cameras, For outdoor systems make sure the cameras mounted near power outlet, if you don’t find you can use Extension power cord, Or wireless battery cameras.

Step3: Connect the cameras

After finishing run security camera wires through walls to the interiors of your home, you will need to connect them. Before that, it is better if you can test the connections and make sure that everything is in place.

You can use a Tester for doing this. Then you can turn on the security cameras and get connected to the DVR, or NVR in case of Digital Network PoE system.

The Tester device have ability to check both Coaxial cables and Ethernet also, so don’t worry!

This is where you can see whether visuals captured by the security cameras are coming to the DVR via wires that you installed.

Final words

Wireless security cameras can help you to overcome the struggles associated with wires. However, a wireless surveillance system is going to cost you a lot of money.

Hence, it is better if you can purchase a wired surveillance system and follow these steps. By following these steps, you can easily understand how to run security camera wires through walls.

Then you just need to focus on making other connections as shown in the user manual that comes along with the security camera system.

In the meantime, you should never ignore planning the positioning of the main box of the wired security system, as it can contribute to the safety of the home surveillance system in the future.

Now, you have a complete understanding of how to run security camera wires through walls, for more safety and to protect their system some people run security camera wires through soffit also, it’s hard, not easy but it’s secure also.

Source: Chargèro, run securit camera wires through walls