Skip to main content

How To Run Security Camera Wires Through Attic

To run security camera wires through attic you don’t need to be a professional, anyone can do it just by following the right steps.

While looking for the best place to install the security camera, you will figure out that the attic is the perfect location to proceed.

That’s because you can get comprehensive coverage by mounting your security camera in the attic. Plus, installing cameras above the house protects the system from damage.

However, this is where you will come across the need to understand how to run security camera wires through attic.

If you are looking for a guide on how to run the wires through attic, you can read this. By following these steps, you will be able to get the job done without a problem.

Steps To Run Security Camera Wires Through attic

Running security camera wires takes too much time if it’s your first time installing a surveillance system, if not that’s mean you have enough experience of steps, and tools used in the whole process.

Let’s see the steps

Step1: Mount the camera and prepare wires

You can proceed with mounting the security camera in your attic. Then you will be able to prepare the wires as well. Make sure that you connect the camera to the video recorder as well.

Then you will be able to get assistance with planning everything easily. You will need to measure the exact route where the wires would come from the camera to the DVR.

You should have some extra long wires so that you can refrain from encountering shortages while you are in the middle of the process.

Step2: Push the wire through attic

Next, you can take a small piece of fish tape and make the cable run through the attic. This process will help you to overcome challenges associated with situations where you are going to get wires to pass through narrow places.

You would not be able to do this on your own. Hence, it is better if you can get the help of a friend or another family member. You will need to do this until you connect the cameras to the DVR.

Step3: Drill holes in the attic and run the wires

You can take your drill and create holes in the attic of the house. You should do this according to the plan that you created.

Then you can get the wires to run through drilled holes. If you have fish tape, you will be able to get the job done easily. You will also need to keep all the wires in one place so that you can make the overall process simple and convenient.

You will need to be using an appropriate drill to drill the holes. The holes you drill should have enough width to pass the wires through them.

Step4: Connect the wires to the camera

Now you will be able to connect all the wires that came from the DVR through the attic to the respective cameras. You should be using electrical tape here to secure them effectively. After that, you can make sure that the wires will not loosen at any given time in the future.

If you didn’t mount the camera in the first instance, you will need to back the wire to the attic and then use your power drill, so that you will be able to securely mount the camera to the base.

You can also adjust the angle of the camera so that you can get the best field of view out of it.

What are the tools used to run security camera wires through attic?

The tools used to run security camera wires through attic exist in every house, so you don’t have to buy new tools. In case it’s your first time installing a surveillance system into attic you should have

  1. Drill and bits: To make holes whatever in the soffit or in walls.
  2. Screwdriver: For fixing camera screws.
  3. Fish rod: Using this tool will make your job so much easy.
  4. Flashlight or headlamp: Attic in most cases becomes a dark place, so having a flashlight on your head will be the right decision.
  5. Camera wires: Depend on your system Analog CCTV system uses Coaxial Cables, Network system uses Ethernet cables, and Power cables.
  6. Electrical tape: It’s good for splicing camera wires in case of cuts or damages.

These are the tools you will use, you can add on any tool you want to make your job easier. Some of these tools are mandatory to have, and some are recommended.

Final words

There is no need to worry about anything when you are trying to get the security camera to be mounted in the attic.

The biggest challenge you have to deal with as you go through this process would be to understand how to run security camera wires through soffit.

Since we clearly explained all the steps on how to get the job done, you will be able to follow these steps and complete the installation of a security camera in the attic.

Resources: World Star Security Cameras

https://www.safebudgets.com/how-to-run-security-camera-wires-through-attic/

Comments

Popular posts from this blog

How To Connect Security Cameras To Smart TV

Connect security cameras to Smart TV is essential these days especially if you have a large number of cameras installed at your place. There are a lot of devices out there used to stream surveillance camera footage on Big TV Screens.  From DVR/NVR to HDMI converters and wifi routers, all of them can be used in connecting and viewing security cameras on Smart TV.  So if you want to connect security cameras to Smart TV, then you should pick a suitable streaming device for your surveillance system. Don’t make a mistake by purchasing a device before knowing if your Smart TV and security cameras are compatible with streaming protocols or not. In addition, you should ensure that you have full access to your system (username, IPs, and passwords of cameras) Streaming Protocols Like RTSP is used in smart TVs to enable you to see a live feed of your cam.  Now, Let’s see  How to Connect Security Cameras to Smart TV As we mentioned above, con...

How To Run Wire Through Soffit | Beginner Guide

Run Wire Through Soffit protects your system wires and cables from anyone trying to cut it, whatever burglars who intend to enter your home or maybe your kids while they’re playing. Professional and most of the house services companies advise to run wire through soffit for any device you want to install like security cameras, and Spotlights. In this article, we take a security camera as an example to run wire through soffit. Nowadays, a lot of homeowners love to have a completely wireless surveillance system, as it has many advantages and has fewer wiring problems than wired systems. On the other hand, the Wired Surveillance system is stronger than wireless security systems and could work for long hours without having connection problems. Now, you may ask Can I Drill Into Soffit? (Explained) The short answer is yes, you have the ability to drill into your soffit if it is Wood, Vinyl, and Aluminum. In case it’s a cement attic it will be hard to drill into...

How to Install Security Camera on Brick Wall (Unlimited Guide)

The words below describe in detail how to install security camera on brick wall.  Security cameras have become an essential element for home safety. In the past, they were considered expensive, but now they are pretty affordable.  They are available in the market with a large variety, you can purchase them according to your budget and need. For example, a CCTV camera for outdoor security is more expensive than an indoor camera. Once you buy a security camera, you need it to be installed.  You can install the camera through a soffit or any place you want, and you can either hire a professional or do it by yourself. So, if you are interested in learning How to install security camera on brick wall then this article is for you, it’s a step-by-step guide. What are the tools used to Mount Security Cameras on Brick Walls?  Well, to be able to install security camera on brick wall you need some important tools such as Ladder. Hammer ...